PET single silicon release film is also known as single-sided from the film made of PET (polyester film) as a substrate, coated on one side silicone oil. From the film surface coating is uniform, no wrinkles, particles, bubbles, etc. Excellent physical properties of products, small thickness tolerances, low heat shrinkable.
Features: 1, thickness of 0.012mm-0.188mm, apply to heat transfer, Adhesive red type.
2, with high resistance and tear strength, high temperature up to 160 degrees or more, mainly for FPC / PCB laminated.
Off force controlled, high gloss, clean and high residual adhesion of more than 94%, and more for the casting process of ceramic capacitors.
|
